Alarm And Message - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[116] ALARM AND MESSAGE

Allows the system administrator or technician to set or change the alarm clock/appointment
reminder feature for any station. This must be done for single line telephones because they
cannot access programming. Three alarms may be set for each station and each alarm may
be defined as a one-time or TODAY alarm or as a DAILY alarm, as described below.
The TODAY alarm is automatically cancelled after it rings, while the DAILY alarm rings
every day at the same time. It is also possible to set a message to display when the alarm is
sounded.
No
1 NOTSET
2 TODAY
3 DAILY
CONDITIONS
NONE
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
DEFAULT DATA
ALARMS ARE NOTSET
ACTION
1) Press Transfer button and enter 116.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and
press Right Soft button to move cursor.
OR
Press ANS/RLS button to select all stations.
3) Dial 1~3 to select alarm.(e.g., 2)
OR
Press Volume button to select alarm and press
Right Soft button to move cursor.
2-30
Type
No alarm
Alarm only once
Alarm daily at set time
Description
DISPLAY
[201] ALM REM(1)
HHMM: NOTSET
[205] ALM REM(1)
HHMM: NOTSET
[ALL] ALM REM(1)
HHMM: NOTSET
[205] ALM REM(2)
HHMM: NOTSET
© SAMSUNG Electronics Co., Ltd.