Assign Forced Code - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[305] ASSIGN FORCED CODE

This MMC allows only one of the four options to be selected; the assignment of account
code with verification, account code without verification, authorization codes, or none on a
per-station basis or on an all-station basis. The system supports 500 authorization codes.
The system supports 999 account codes that are verified when account codes verified is
selected. If account codes without verification is selected, then there will be no table used.
No
0 NONE
1 AUTHORIZE CODE
2 ACCT VERIFIED
3 ACCT NO VERIFIED
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 305.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
3) Dial a feature option 0-3.(e.g., 2)
OR
Press Volume button to select option and press
Right Soft button to return step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 707
MMC 708
2-82
Type
No Account or Authorization code required(NOT forced strictly
voluntary).
Forces user to enter a valid over four digit Authorization code
listed in AUTHORIZATION CODE Table(MMC 707).
Forces user to enter a valid account code listed in ACCOUNT
CODE Table(MMC 708).
Forces user to enter an account code but this code is NOT
verified. User can make up any code(any account code up to
12 digits including ∗ and #).
AUTHORIZATION CODE
ACCOUNT CODE
Description
DISPLAY
[201] FORCD CODE
NONE
[205] FORCD CODE
NONE
[205] FORCD CODE
ACCT VERIFIED
© SAMSUNG Electronics Co., Ltd.