Connection Status - Samsung OfficeServ 500 Programming Manual

[434] CONNECTION STATUS

This read only MMC will confirm the connection status of stations or trunks.
Display status actually displays the status of a station or trunk at the time requested.
If a conference is in progress with the selected trunk or station the display will show one of
the conference parties and an arrow( ). The technician or system administrator can then
display the next parties in the conference. If a station or trunk is in an idle state the display
will show 'IDLE'. If the station or trunk selected is not a valid selection the display will
show 'INVALID DATA'. If the station or trunk is made busy by the CPU the display will
show 'MADE BUSY'. If the station is in busy state with no other connection, the display
will show 'BUSY' only.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
Display trunk connection status
1) Press Transfer button and enter 434.
2) Enter station or trunk number.
Display show connection status:
3) Enter another station or trunk.
OR
Press Transfer button to exit.
Display station connection status
1) Press Transfer button and enter 434.
2) Enter station or trunk number.
Display show connection status.
3) Enter another station or trunk.
OR
Press Transfer button to exit.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
DISPLAY STATUS
201 IDLE
DISPLAY STATUS
702 227
DISPLAY STATUS
702 227
DISPLAY STATUS
201 IDLE
DISPLAY STATUS
235 715
DISPLAY STATUS
235 715
2-155