[812] SET COUNTRY CODE
This MMC must be run by the installer before any other programming is done.
When changing the MMC [812]
'MMC [812] SET COUNTRY CODE' should not be used from the default levels
without the assistance of the local SAMSUNG distributor.
CONDITIONS
Allows the system installer to select system software country. If you change the country
selection, the system will be restart and all customer data returns to defaulted status
according to the selected country.
DEFAULT DATA
According to MCP2 DIP S/W.
ACTION
1) Press Transfer button and enter 812.
Display shows:
2) Press Volume button to make selection and
press Right Soft button.
3) Press Volume button to select Yes or No and
press Right Soft button.
When you select 'YES'
if you select 'YES', this will restart the system and all data make default.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
ALL MMC
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
SELECT COUNTRY
Undefined
SELECT COUNTRY
RUSSIA/CIS
DEFAULTING SYSTM
ARE YOU SURE?NO
2-337