Samsung OfficeServ 500 Programming Manual page 297

Hide thumbs Also See for OfficeServ 500:

Table of Contents

DEFAULT DATA

SEE DEFAULT DATA ON MMC 722

1) Press Transfer button and enter 723.

Display shows:

2) Enter type of set via dial keypad.(e.g.,1)

Press Volume button to make selection and

press Right Soft button.

3) Enter key number.(e.g., 03)

Press Volume button to make selection and

press Right Soft button.

4) Using table above, press dial keypad number to

make selection.

Press Volume button to make selection and

press Right Soft button to advance cursor to step

5 to enter extender, if required.

Press Left Soft button to return to step 3.

5) If required, enter extender.(e.g.,03)

Press Volume button to make selection and

press Right Soft button to return to step 2.

6) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.