Change Customer Passcode - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[201] CHANGE CUSTOMER PASSCODE

Used to change the passcode allowing access to MMC 200 Open Customer Programming
from its current value.
CONDITIONS
The passcode is four digits long. Each digit can be 0-9.
The current(old) passcode is required for this MMC.
DEFAULT DATA
PASSCODE: 1234
ACTION
1) Press Transfer button and enter 201.
2) Enter new passcode via dial keypad.
(maximum four digits)
3) Verify new passcode via dial keypad.
Passcode verified.(go to step 4)
OR
Passcode failure.
Return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 200
2-46
OPEN CUSTOMER PROGRAMMING
DISPLAY
CUST. PASSCODE
NEW CODE:_
CUST. PASSCODE
NEW CODE:****
CUST. PASSCODE
VERIFY :****
CUST. PASSCODE
VERIFY :SUCCESS
CUST. PASSCODE
VERIFY :FAILURE
© SAMSUNG Electronics Co., Ltd.