Samsung OfficeServ 500 Programming Manual page 101

No Option
56 VOIP REALRBT
62 SMDR
AUT2ACC
64 IPNW REAL RB
66 TRK AUTO
MOH
67 TRSF VT KEY
68 PAIR NO RING
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
SOME OPTIONS ARE DEPEND ON COUNTRY
ACTION
1) Press Transfer button and enter 210.
Display shows:
2) Dial option number.(e.g., 00)
Press Right Soft button to move cursor.
3) Dial 1 for ON or 0 for OFF.
OR
Press Volume button to make selection and
press Right Soft button.
© SAMSUNG Electronics Co., Ltd.
Default
OFF When ON, the system will connect real path of outgoing
trunk to the incoming VOIP Trunk user instead of providing
the virtual ringback tone.
OFF When ON, the AUTHORIZATION CODE will be printed in
ACCOUNT field of SMDR.
OFF Sets whether to play a virtual tone or the ring-back tone
returned from the other party, for a VoIP networking call.
OFF If this option is set to ON and if a call arrives through a C.O.
line whose AUTO ANSWER option is set to ON by MMC 400
(DID DESTINATION must also be set to A if the incoming call
adheres to the DID reception table.), the call will be
answered automatically after the DISA ANSWR TIME
defined by MMC 400 elapses. The system plays the sound
defined by MMC 408 to the caller and connects the call to
the destination defined by MMC 406. If the call is not
answered within the MMC 501 TRK AUTOMOH DISC TIME,
the system disconnects the call automatically.
ON If set to ON, pressing this key will be same as pressing the
VT key when switching to Voice Mail.
OFF If set to OFF while a call is camping on an extension, the
system services off-hook ring to the connected station and
disables the idle paired extension from ringing.
OfficeServ 500 Programming Guide
(Continued)
Description
DISPLAY
TEN. ON AND OFF
DISA PSWD :OFF
TEN. ON AND OFF
DISA PSWD :OFF
TEN. ON AND OFF
DISA PSWD :ON
2-59