Trunk Line/Pbx Line - Samsung OfficeServ 500 Programming Manual

[401] TRUNK LINE/PBX LINE

Used to select the mode of the Trunk line. If the PBX mode is chosen, this allows PBX
access codes to be recognized, thus allowing more complete toll restriction(call barring).
This mode is assigned on a per-trunk basis.
CONDITIONS
NONE
DEFAULT DATA
ALL TRUNK LINES
ACTION
1) Press Transfer button and enter 401.
Display shows:
2) Dial trunk number.(e.g., 704)
OR
Use Volume button to scroll through trunk
numbers and press Right Soft button to move.
OR
Press ANS/RLS button to select all.
3) Dial 1 for PBX or 0 for Trunk Line.
OR
Use Volume button to scroll through options
Press Right Soft button to return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE
2-107