Voice Dialler Options - Samsung OfficeServ 500 Programming Manual

[215] VOICE DIALLER OPTIONS

Assigns either two(2) channels and seven(7) users or one(1) channel and five(5) users to
the VDIAL card. When changing channel size, you will be prompted to 'clear RAM'. This
is only for Voice Dialler, not the system.
This will prevent accidental usage of pre-recorded names. It is advised that you clear RAM
before assigning users in MMC 216.
No Voice Dial Option
0 2CH-7USER-20BIN
1 1CH-5USER-40BIN
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 215.
Display shows:
2) Enter Voice Dialler number(e.g., 3551)
via dial keypad.
OR
Press Volume button to select Voice Dialler and
use Right Soft button to move cursor.
3) Dial 0 or 1 for Voice Dialler channel select.
OR
Press Volume button to make selection and
press Right Soft button.
4) Press Transfer button and enter to save and exit.
OR
Press Speaker button to save and advance to next MMC.
RELATED ITEMS
MMC 216
MMC 722
MMC 723
MMC 724
© SAMSUNG Electronics Co., Ltd.
Two ports can be used for a voice dial device card. A port can
accommodate up to 7 subscribers and up to 20 names per
subscriber.
One port can be used for a voice dial device card. A port can
accommodate up to 5 subscribers and up to 40 names per
subscriber.
VOICE DIALLER ASSIGNMENTS
STATION KEY PROGRAMMING
SYSTEM KEY PROGRAMMING
DIAL NUMBER PLAN
OfficeServ 500 Programming Guide
Description
DISPLAY
[3551]VDIAL OPTN
2CH-7USER-20BIN
[3551]VDIAL OPTN
2CH-7USER-20BIN
[3551]VDIAL OPTN
1CH-5USER-40BIN
2-63