Assign Trunk Moh Source - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[408] ASSIGN TRUNK MOH SOURCE

Allows the system administrator to select which Music On Hold(MOH) source can be
heard on each trunk. If the trunk AUTO ANSWER function is enabled, this program can be
used for selecting the music source. The trunk AUTO ANSWER function can be enabled
only when the TRK AUTO MOH option of [MMC 210] is set to ON and when the AUTO
ANSWER option of [MMC 400] is set to ON. (If an incoming call adheres to the DID
reception table, the DID DESTINATION must also be set to A.)
In this MMC, you can also assign the sound source when TRUNK AUTO ANSWER
feature is activated.
For the five types of selections, see below :
Type
TONE
NONE
37X
39XX(when AA is used)
SVMi PORT NUMBER
CONDITIONS
To use an external sound source, connect the corresponding port of the terminal box to the
external sound source of the MISC card.
DEFAULT DATA
TONE
ACTION
1) Press Transfer button and enter 408.
Display shows: current setting.
2) Dial trunk number.(e.g., 704)
OR
Use Volume button to scroll through trunk numbers
and press Right Soft button to move cursor.
OR
Press ANS/RLS button to select all.
2-116
An intermittent tone is played to the caller.
No Music on Hold selection.
If X is zero(0), a chime tune is played. If X is another number, an
external source from a MISC(daughter) board is played.
The MOH source is provided by the AA card. See MMC 739.
If you have a SVMi Voice Mail System installed you may also select a
SVMi recording as a music source. The recording must already been
defined in MMC 756 and will show up here as the SVMi port associated
with the recording.
Description
DISPLAY
[701] TRK MOH
MOH:TONE AA:TONE
[704] TRK MOH
MOH:TONE AA:TONE
[ALL] TRK MOH
MOH:? AA:?
© SAMSUNG Electronics Co., Ltd.