Change Technician Passcode - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

[801] CHANGE TECHNICIAN PASSCODE

Used to change the passcode which allows access to MMC 800 Enable Technician Program

from its current value.

The passcode is four characters long. Each character can be digits 0-9. The current or old

passcode is required for this MMC.

DEFAULT DATA

DEFAULT PASSCODE: 4321

1) Press Transfer button and enter 801.

2) Enter new passcode.

3) Enter new passcode again.

4) If passcode is correct, press Right Soft

key to continue and enter desired MMC.

If passcode is incorrect.

System returns to step 2.

5) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.