Lcr Time Table - Samsung OfficeServ 500 Programming Manual

[711] LCR TIME TABLE

This table gives the flexibility to the system, through the LCR ROUTES, to allow calls
placed at any given time of day to use the least cost trunk route that is available. When
LCR ROUTE ADVANCE is allowed, it is possible for calls to be placed on more expensive
trunks on any given time of day. There are four possible time entries per day; the start time
of the next time period is the end time of the previous time period.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 711.
Display shows:
2) Dial day of week.(SUN-SAT, e.g., WED)
OR
Press Volume button to make day selection and
press Right Soft button.
3) Dial time band.(A-D, e.g., B)
OR
Press Volume button to make selection and press
Right Soft button.
4) Dial time via keypad.(24-hour format, e.g., 0800)
Cursor moves to LCRT.(reference MMC 712)
5) Dial time table number.(1-4)
OR
Press Volume button to make selection and press
Right Soft button.
6) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 712
© SAMSUNG Electronics Co., Ltd.
LCR ROUTE TABLE
OfficeServ 500 Programming Guide
DISPLAY
LCR TIME (SUN:A)
HHMM: LCRT:-
LCR TIME (WED:A)
HHMM: LCRT:-
LCR TIME (WED:B)
HHMM: LCRT:-
LCR TIME (WED:B)
HHMM:0800 LCRT:-
LCR TIME (WED:B)
HHMM:0800 LCRT:1
2-233