Samsung OfficeServ 500 Programming Manual page 452

CHAPTER 2. Ошибка! Стиль не определен.
No Code
97 MNG06
CONDITIONS
NONE
DEFAULT DATA
ALL OFF
ACTION
1) Press Transfer button and enter 852.
Display shows:
2) Enter desired Alarm Display number.(e.g., 64)
OR
Press Volume buttons to select desired
option and press Right Soft button and to
advance the cursor.
3) To select if the alarm is active press 1 for
YES and 0 for NO.
An entry will advance the cursor to return to
step 2.
OR
Press Volume buttons to make selection
and press Right Soft button to save and
return step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 501
MMC 722
MMC 723
MMC 851
MMC 853
2-410
Alarm Name
MGI Packet Delay Indicates the MGI connection RTP packet delay is more
than 500 ms.
Alarm Data = Tel number or Cx-Syy-Pzz
SYSTEM TIMERS
STATION KEY ASSIGNMENT
SYSTEM WIDE KEY ASSIGNMENTS
SYSTEM ALARM REPORTING
MAINTENANCE BUSY
(Continued)
Definition
DISPLAY
01:MJA01 ACT:OFF
POR Restart
64:MNF01 ACT:OFF
Card Out
64:MNF01 ACT:ON
Card Out
© SAMSUNG Electronics Co., Ltd.