Samsung OfficeServ 500 Programming Manual page 375

DEFAULT DATA
RX
TX
DGP
SLT
ATRK
DTRK
DECT
VOIP
SVMi
WLAN
ACTION
1) Press Transfer button and enter 809.
Display shows:
2) Press Volume button to make selection(0-3).
After selection is made, press Right Soft button
to move cursor.
3) (When the TX LEVEL CONTROL is selected)
a) Select the desired volume level via dial keypad.
OR
Press Volume button to go to the next volume level
and press Right Soft button.
b) Enter desired volume data via dial pad.
OR
4) (When the MISC TSW GAIN is selected)
a) Enter desired MISC/BGM TSW gain via dial keypad.
OR
Press Volume button to select desired MISC/BGM
TSW gain and press Right Soft button.
© SAMSUNG Electronics Co., Ltd.
DGP SLT ATRK
0.0 0.0 0.0
0.0 -6.0 0.0
0.0 0.0 -6.0
0.0 +1.9 +1.9
0.0 0.0 0.0
0.0 0.0 0.0
0.0 0.0 0.0
+0.0 +0.0 -6.0
OfficeServ 500 Programming Guide
DTRK DECT VOIP
0.0 -6.0 0.0
+0.0 -6.0 0.0
-6.0 -6.0 0.0
0.0 -6.0 0.0
+1.9 -6.0 0.0
0.0 -6.0 0.0
0.0 -6.0 0.0
0.0 0.0 0.0
DISPLAY
TX LEVEL CONTROL
LEVEL 0 0
TX LEVEL CONTROL
LEVEL 1 1
TX LEVEL CONTROL
LEVEL 1 1
TX LEVEL CONTROL
LEVEL 1 3
MISC TSW GAIN
BGM/MOH :0
SVMi WLAN
-6.0 +0.0
-6.0 +0.0
-6.0 +0.0
-6.0 0.0
-6.0 0.0
-6.0 0.0
-6.0 0.0
0.0 +0.0
2-333