Preset Fwd No Answer - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[320] PRESET FWD NO ANSWER

Allows a technician to assign a default destination for FNA to each station on the system.
These destinations may be different for each station or they may be the same. The preset
FNA destination will be temporarily overwritten if the station user enters a different FNA
destination. If you cancel the new destination, the preset destination will once more be in
effect. Preset Forward No Answer time follows the station no answer forward timer.
Preset forward no answer can be assigned respectively for each type of call.
No Type
0 INT
1 EXT
2 BOTH
When setting PRE FWD BUSY in MMC 210
If MMC 210. PRE FWD BUSY sets ON, the forward busy follows this feature.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 320.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
OR
Press ANS/RLS button to select all stations.
3 Dial valid number via keypad.
)
OR
Press Volume button to select call type and
press Right Soft button to move cursor.
2-100
Preset forward no answer applies only to intercom call.
Preset forward no answer applies only to incoming call.
Preset forward no answer applies to both intercom and incoming call.
Description
DISPLAY
[201] PRESET FNA
NONE OPT:BOTH
[205] PRESET FNA
NONE OPT:BOTH
[ALL] PRESET FNA
NONE OPT:BOTH
[205] PRESET FNA
202 OPT:BOTH
© SAMSUNG Electronics Co., Ltd.