INTRODUCTION
Purpose
This guide describes a programming method for the OfficeServ 500 system users.
OfficeServ 500 allows you to utilize a digital phone to simply change the system setup.
Likewise, using a phone to change the system setup is called MMC(Man Machine
Communication) program. This guide describes how to program a digital phone.
Document Content and Organization
This guide is composed of two Chapters and one Annex. Each chapter is introduced as
follows:
CHAPTER 1. Overview Of MMC Programming
This chapter describes things to know before starting MMC programming and about the
buttons of digital phone and cautions.
CHAPTER 2. MMC Programming
This chapter describes how to use each MMC program as it was listed.
ANNEX A. Abbreviation
Acronyms frequently used in this document are described.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
I