Samsung OfficeServ 500 Programming Manual page 319

PROGRAM BUTTONS
A Used to enter P on destination field
B Used to enter B on digit or destination field
C Used to enter C on destination field
D Used to enter D on destination field
ACTION
1) Press Transfer button and enter 732.
Display shows:
2) Dial TABLE number.(01-12, e.g., 02)
OR
Press Volume button to select and press
Right Soft button.
3) Dial ENTRY number.(001-100, e.g., 002)
OR
Press Volume button to select and press
Right Soft button.
4) Enter Dial DIGIT and press Right Soft button.
5) Enter Destination.
OR
Press Volume button to select and press
Right Soft button.
6) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 733
MMC 507
© SAMSUNG Electronics Co., Ltd.
AUTO ATTENDANT PLAN PROGRAMMING
RING PLAN TIME
OfficeServ 500 Programming Guide
DISPLAY
AA TRANS TB (01)
001:0 500
AA TRANS TB (02)
001: NONE
AA TRANS TB (02)
002: NONE
AA TRANS TB(02)
002:2∗∗ NONE
AA TRANS TB(02)
002:2∗∗ 201
2-277