Samsung OfficeServ 500 Programming Manual page 218

CHAPTER 2. Ошибка! Стиль не определен.
TONE
DND/NO MORE TONE
ERROR TONE
HOLD/CAMP-ON TONE
MESSAGE WAIT TONE
RING BACK TONE
RING TONE
TRANSFER TONE
DID RINGBACK TONE
CO BUSY TONE
CO RINGBACK TONE
CO DIAL TONE
(a unit: milliseconds)
ACTION
1) Press Transfer button and enter 506.
Display shows:
2) Dial tone number from above list.(00-13, e.g., 09)
OR
Press Volume button to select tone, press Left Soft
button and advance to step 3.
3) Dial tone option 0 for CONTINUOUS or 1 for
INTERRUPT.
OR
Press Volume button to select tone control and press
Right Soft button to advance step 4.
OR
Press Left Soft button to return to step 2.
4) Dial new value for interrupt times.
(must be four digits)
Press Right Soft button advances cursor and
press Left Soft button retreats cursor.
If valid entry, system returns to step 2.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
2-176
ON OFF
250 250
500 500
500 3500
1000 250
400 200
1000 3000
100 100
1000 3000
350 350
400 200
CONTINUOUS -
(Continued)
ON OFF
250 250
500 500
500 3500
1000 250
400 2000
1000 3000
100 100
1000 3000
350 350
400 2000
- -
DISPLAY
BUSY TONE
INTERRUPT TONE
TRANSFERER TONE
INTERRUPT TONE
TRANSFERER TONE
INTERRUPT TONE
TRANSFERER TONE:0100
9900 0100 9900
© SAMSUNG Electronics Co., Ltd.