Samsung OfficeServ 500 Programming Manual page 383

ACTION
1) Press Transfer button and enter 815.
Display shows:
If the Smart Media is used already, the display shows.
2) Press Right Soft button to move cursor.
3) Press Volume button to make selection and press
Right Soft button to move cursor.
4) Press Volume button to select YES or NO and
press Right Soft button.
5) Press Volume button to select YES or NO and
press Right Soft button.
If you select YES, the display shows.
6) Press Volume button to make selection and
press Right Soft button to move cursor.
7) Press Volume button to make selection and
press Right Soft button to move cursor.
8) Input save time.
OR
Press Right Soft button to move cursor.
9) Press Volume button to make selection and
press Right Soft button to move cursor.
10) Press Volume button to make selection and press
Right Soft button to make change and
return to the step 9.
11) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
CUST DBASE:SMDB
S:12/01/01 00:00
CUST DBASE:SMDB
SMART IS BUSY
CUST DBASE:SMDB
S:12/01/01 00:00
CUST DBASE:SMDB
CLEAR SMDB :NO
CUST DBASE:SMDB
CLEAR SMDB :YES
CUST DBASE:SMDB
ARE YOU SURE?NO
CUST DBASE:SMDB
Cleared....
CUST DBASE:SRAM
DAILY SAVE:00:00
CUST DBASE:SRAM
DAILY SAVE:00:00
CUST DBASE:SRAM
DAILY SAVE:23:30
CUST DBASE:SRAM
COPY TO SMDB:NO
CUST DBASE:SRAM
ARE YOU SURE?:YES
2-341