Hot Line/Off Hook Selection - Samsung OfficeServ 500 Programming Manual

[306] HOT LINE/OFF HOOK SELECTION

Allows a station the ability to make a predetermined call similar to a ring down circuit,
upon the expiration of a timer(see MMC 502 STN TIMERS, Off-Hook Selection Timer).
CONDITIONS
The hotline destination can be a station, a station group, a trunk, a trunk group or an
external number.
There can be a maximum of 18 digits in the dial string for the external number.
The access code for the trunk or trunk group access code is not counted as part of the 18.
DEFAULT DATA
NONE
PROGRAM BUTTONS
B Used to insert a flash code 'F'
C Used to insert a pause code 'P'
D Used to insert a pulse/tone conversion code 'C'
E Used to mask/unmask following digits-shows as '[' or ']'
ACTION
1) Press Transfer button and enter 306.
Display shows:
2) Dial station number.
OR
Use Volume button to scroll through stations.
Press Right Soft button to move the cursor.
3) Enter the hot line destination i.e. a station or
trunk ID(e.g., 9 or 701) with a maximum of
18 outgoing digits after the access code for
the CO call. (see above list of options if needed)
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 502
© SAMSUNG Electronics Co., Ltd.
STN TIMERS, OFF-HOOK SELECTION TIMER
OfficeServ 500 Programming Guide
DISPLAY
[201] HOT LINE
NONE
[205] HOT LINE
NONE
[205] HOT LINE
9-1305P4264100_
2-83