Download Print this page
Samsung 5 Series Quick Setup Manual

Samsung 5 Series Quick Setup Manual

Hide thumbs Also See for 5 Series:

Advertisement

Quick Links

Quick Setup Guide
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
STOP
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Please do not return this unit.
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
If you have problems operating your
Call Center hours of operation: Mon-Sun, 9:00 AM -12
TV, call:
AM EST.
1-800-SAMSUNG (1-800-726-7864)
To register this product, visit: www.samsung.com/
For web support please visit:
register.
www.samsung.com/support
Step 1
: Install the Stand
Follow the steps below to connect the TV to the stand.
NOTE
x
Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LCD TV.
x
Stand the product up and fasten the screws. If you fasten the screws with
the LCD TV placed down, it may lean to one side.
1
Connect the Guide Stand to the
Stand using four screws
(M4 X L12) as shown.
2
With your TV upright, connect
the TV to the Stand as shown.
Front
Rear
Step 2
: Install the Batteries into the Remote
To install batteries into your remote control,
follow these steps:
1. Lift the cover on the back of the remote
upward as shown in the figure to the right.
2. Install two AAA batteries.
Make sure to match the + and -
ends of the batteries to the diagram
in the battery compartment.
3. Replace the cover.
Step 3
: Connect Power and Antenna or Cable
Best to use 75 ohm (round) cable.
Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
Screws (M4 X L12)
Top view
Guide Stand
Stand
Rear
3
Fasten the two screws (M4 X L12) at
position 1, and then fasten the two
screws (M4 X L12) at position 2.
2
1
VHF/UHF Antenna
Connect Ant In to
Antenna Cable (Not Supplied)
• Wall cable jack
• VHF/UHF Antenna
or
• Cable or Satellite box
Ant or Cable Out
Step 4
: Connect External Devices
Connecting an AV device (DVD/ Blu-ray player, cable/satellite bo
Use one of the connections below to connect your TV to an external A/V device. We re
Very Good Connection
HD connection (up to 720p/1080i)
Using an HDMI to DVI Cable
Device
Good Connection
Component connection (up to 720p/1080i)
Using a Component Cable
DVD / Blu-ray player / HD Cable Box / HD Satellite receiver (STB)
Device
COMPONENT OUT
Front
Rear
Step 5
: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV's channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the
button on the remote or on the TV. To run Plug & Play, follow these steps:
1
Using your remote control,
select the language for the On
Screen Display (OSD), and then
press the ENTERE button.
2
Select Home Use, and then
press the ENTERE button. If
you select Store Demo, the TV
will reset your picture and audio
settings every 30 minutes.
3
Select the Antenna Source
to memorize. you must select
Antenna Source to same type
as your cable system type. After
selecting source, select Start;
then press the ENTERE
button on your remote.
HDMI to DVI Cable
(Not Supplied)
AUDIO OUT
DVI OUT
AUDIO OUT
Audio Cable (Not Supplied)
Component Cable (Not Supplied)
button. To turn on your TV, press the
MENU
Plug & Play
Plug & Play
Select Language of the OSD.
Language
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Audio Cable
(Not Supplied)
POWER
English
Español
Français
U Move E Enter
Home Use
L Move E Enter
Start
Start
Start
U Move E Enter m Skip

Advertisement

loading

Summary of Contents for Samsung 5 Series

  • Page 1 Quick Setup Guide Step 4 : Connect External Devices Congratulations on the purchase of your new Samsung TV. Read this setup guide to get your TV up and running quickly. Connecting an AV device (DVD/ Blu-ray player, cable/satellite bo 1-800-SAMSUNG (1-800-726-7864) STOP Use one of the connections below to connect your TV to an external A/V device.
  • Page 2 Step 6 : Remote Control Remote Control Buttons and Functions Displays and selects the available video Turns the TV on and off. sources. Press to directly access channels. Press to select additional channels (digital) being broadcasted by the same station. For Returns to the previous channel.

This manual is also suitable for:

500