Samsung OfficeServ 500 Programming Manual page 189

No Option
5 ISDN
DATA
TELEX
NATIONAL
PRIVATE
EXTEN
6 CLIR w NUMB
OPTIONS FOR BRI PORTS PROGRAMMED AS STATIONS
No Option
0 ANY CHANNEL
1 POWER FEED
CONDITIONS
A BRI card must be installed in the system. Otherwise, the 'NO BRI CARD' message
is displayed.
If any changes are made in this MMC, the BRI card that is affected by these changes
MUST be restarted using MMC 425 in order for the changes to become effective.
DEFAULT DATA
For BRI Ports programmed as Trunks:
CHANNEL ANY: YES
BRI MODE: P-P DDI
DLSEND: OVERLAP
CLIP TABLE: NONE
NB TYPE: UNKNOWN
NB PLAN: UNKNOWN
CLIR w NUMB: OFF
© SAMSUNG Electronics Co., Ltd.
ISDN numbering plan(CCITT E.163-164)
Data numbering plan(CCITT X.121)
Telex numbering plan(CCITT F.69)
National standard numbering plan
Private numbering plan
Local numbering plan
When this option is set to ON, the CLIP number is sent to the network
even though the CLIP restriction flag is set.
0. OFF
1. ON
When this option is set to YES, the system will place calls on any free
channel of that BRI if the channel chosen by the user is busy(e.g.,
Preferred channel selection). If set to NO, the user will receive a busy
signal if they attempt to access a busy channel even if the other channel
on that BRI is free(e.g., Exclusive channel selection).
This field determines if power to a BRI access will be supplied.
(YES or NO)
OfficeServ 500 Programming Guide
Description
Description
(Continued)
2-147