Samsung OfficeServ 500 Programming Manual page 99

No Option
14 ICM EXT FWD
16 DID ERR TONE
18 KTS DISC ALM
19 OFF HOOK ALM
20 SL SELF RING
21 SGR INC BUSY
24 TRANSFER
CANCEL
26 RECALL DISC
29 ARD TONE CHK
30 VPN ENABLE
31 IN TOLL CHK
32 ISDN
PROGCON
33 INCLUDE VAT
36 DSS KEY DPU
37 BEGN DGT DSP
38 ONE TCH
FACC
© SAMSUNG Electronics Co., Ltd.
Default
OFF When ON, call forward external is allowed when intercom calls
are placed to a station that has Call Forward External
programmed and set.
OFF This option was added to provide error tone when an invalid
DID number is received.
OFF When ON, generates system alarm when a phone
disconnect or connect.
OFF When ON, generates system alarm when a phone maintains
off hook condition longer than timer.
OFF When ON, generates ring during 10 seconds when a single
line phone dials self number and hang up.
OFF When ON, generates busy tone when all station group
member busy for group call. This setting does not work for
Station Groups which have Unconditional Ring Mode.
OFF When OFF, a single line phone will be able to handle 2 calls
simultaneously. Using the hook-flash to toggle between
them. When ON, a single line telephone will be able to
connect to the second call, but pressing the hook flash will
not toggle between the two calls it will disconnect the second
call and reconnect the single line telephone to the first call.
OFF When ON, the system disconnects a call when transfer
recall.
ON When OFF, the system use time for checking destination is
busy when auto retry.
OFF When ON, the Australia type VPN enabled.
OFF When OFF, the system doesn't toll restrict when incoming call.
OFF When ON, if an outgoing call receives PROGRESS
message from ISDN trunk, the call will connect without
CONNECT message.
OFF When OFF, not printed VAT total line when Hotel
Report.(Available in Hotel/Motel enabled only)
OFF When ON, directed pick-up the call when press ringing DS key.
OFF When ON, an outside call is made via speed dial or LNR
where more than 11 digits are dialed then the first dialed
digits are shown on the phone display.
OFF When OFF, the forced account mode user can not use one
touch account code(ACC) key.
OfficeServ 500 Programming Guide
(Continued)
Description
2-57