Samsung OfficeServ 500 Programming Manual page 204

CHAPTER 2. Ошибка! Стиль не определен.
Timer Name
CALLBACK NO ANS
CAMP ON RECALL
CID MSG RECEIVE
CID DSP ALLOC TM
CID DISPLAY TIME
CO CONFIRM TIME
CO-CO
DISCONNECT
CONFIRM TONE TM
CRD TONE INT TM
DIAL PASS TIME
DISA DISCONNECT
DISA LOCK OUT TM
2-162
Default Range Unit
30 1-250 SEC
30 0-250 SEC
6 1-25 SEC
500 0-900 MS
5 1-25 SEC
3 0-250 MIN
20 1-250 MIN
1000 100-2500
MSEC
30 0-250 SEC
3 0-25 SEC
30 1-250 MIN
30 1-250 MIN
Description
This timer controls the time before the
callback is automatically cancelled when a
callback detects Ring No Answer.
This timer controls the duration of time a
camped-on call will stay at a destination
before recalling to the transferring station.
The amount of time that the system will
allow a valid message from the analog CID
trunk.
The delay time that allocate the CID
receiver after trunk incoming detection
The amount of time that the Caller ID
information remains on the phone's display.
According to MMC 314 CO CONFIRM type,
the outgoing call will be disconnected after
this timer or the outgoing caller will hear the
confirm tone every this time.
This timer monitors the duration of an
unsupervised conference; when it expires,
both trunks are disconnected.
The tone heard when a feature is activated
or deactivated.
This is the call record tone interval time.
An entry other than zero will cause a tone to be
heard by all the parties in a recorded
conversation. The range for the tone is
001(every second) to 255(every 255 seconds).
A value of 000 means no tone. Requires SVMi
card.
This timer monitors the duration of time
before connecting the transmit of the phone
to the trunk side of an outgoing call.
This timer controls the maximum duration of a
DISA call.
This timer controls the duration of time a
DISA call is not allowed to be made after
the DISA error counter has expired(MMC
500).
© SAMSUNG Electronics Co., Ltd.
(Continued)