Samsung OfficeServ 500 Programming Manual page 450

CHAPTER 2. Ошибка! Стиль не определен.
No Code
-
MNF--
65 MNF01
66 MNF02
67 MNF03
68 MNF04
69 MNF05
70 MNF06
71 MNF07
72 MNF08
73 MNF09
74 MNF10
75 MNF11
76 MNF12
77 MNF13
78 MNF14
79 MNF15
80 MNF16
2-408
Alarm Name
Minor Error Minor Fault with Alarm Buffer saving
Card Out A circuit card mounted in a universal slot has been
removed from service or is not recognized by the system
Alarm Data = Cabinet, Slot(Cx-Syy)
Card In A circuit card mounted in a universal slot has been
returned to service.
Alarm Data = Cabinet, Slot(Cx-Syy)
IPC Error Inter processor communication error has occurred.
Alarm Data = Cabinet-Slot(Cx-Syy)
Trunk Fault Out of service trunk detected via loop detect. Internal
CODEC test.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
Trunk Recovery Out of service trunk detected via loop detected as out of
service is now operational.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
Trunk Out of service trunk detected via seizure of trunk.
Disconnect External seizure test.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
Trunk Connect Out of service trunk recovered via seizure of trunk
External seizure test.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
SIO TxQ Over SIO Tx Queue full error has occurred in the MCP2.
Alarm Data = SIO number(SIO: x)
SIO TxQ Under SIO Tx Queue under error has occurred in the MCP2.
Alarm Data = SIO number(SIO: x)
E1 Out Of Srv E1 Digital line status has been changed to out of
service.
Alarm Data = Cabinet, Slot(Cx-Syy)
E1 In Service E1 Digital line has been restored to normal service.
Alarm Data = Cabinet, Slot(Cx-Syy)
SIO Out IO port has lost DTR
Alarm Data = SIO number(SIO: x)
SIO In IO port has regained DTR.
Alarm Data = SIO 1 through 6
TODC Error Time of Day Clock in the MCP2 has erred.
TSW Over Alarm The TSW has been requested to exceed the capacity of
available time slots. Maximum 192 per cabinet.
Alarm Data = Cabinet, Slot(Cx-Syy)
PSU Alarm Indicates there are over 56 ports in a cabinet with a
single PSU and more power is required.
Alarm Data = Cabinet, Slot(Cx-Syy)
(Continued)
Definition
© SAMSUNG Electronics Co., Ltd.