Halt Processing - Samsung OfficeServ 500 Programming Manual

[810] HALT PROCESSING

Used only in the event that all data processing needs to be stopped either in a single cabinet
slot or in the entire system.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 810.
Display shows:
2) Enter cabinet selection via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to advance cursor.
Press ANS/RLS button to select all cabinets
and slots.
3) Enter slot number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to advance cursor.
4) Enter 1 for HALT or 0 to PROC.
OR
Press Volume button to make selection and press
Right Soft button to enter and return to step 2.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
HALT/PROCESSING
C:ALL S:ALL PROC
HALT/PROCESSING
C:1 S:ALL PROC
HALT/PROCESSING
C:ALL S:ALL PROC
HALT/PROCESSING
C:1 S:2 PROC
2-335