Samsung OfficeServ 500 Programming Manual page 447

No Code
-
MJB--
10 MJB01
11 MJB02
12 MJB03
13 MJB04
14 MJB05
15 MJB06
16 MJB07
-
MJC--
17 MJC01
18 MJC02
26 MJC10
27 MJC11
28 MJC12
29 MJC13
32 MJC16
33 MJC17
© SAMSUNG Electronics Co., Ltd.
Alarm Name
LCP/TASK Error LCP or TASK Fault
HDLC Com Error Communications to LCP lost or faulty.
Memory Alarm 1 A RAM diagnostic check error has occurred in the MCP2.
Memory Alarm 2 A RAM diagnostic check error has occurred in the
cabinet 1 SCP2.
Memory Alarm 3 A RAM diagnostic check error has occurred in the
cabinet 2 LCP2.
Memory Alarm 4 A RAM diagnostic check error has occurred in the
cabinet 3 LCP2.
IPC MSGQ Over IPC TX queue full error has occurred in the MCP2.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
Task MSGQ Over Task MSG queue full error has occurred in the MCP2.
Alarm data = Error Task
DSP Error System DSP Fault
DTMF Fault An abnormal interrupt has occurred in the system
DTMF resources.
Alarm data = DTMF Receiver DSP position
Tone Fault An abnormal interrupt has occurred in the system
tone resources.
Alarm data = TONE Receiver DSP position.
AA-DTMF Fault An abnormal fault reported in one of the AA card
DTMF resources.
Alarm data = Cabinet, Slot, Port(Cx-Syy-Pzz)
AA-MFR Rec An abnormal fault reported in one of the AA card
DTMF resources has recovered.
Alarm data = Cabinet, Slot, Port(Cx-Syy-Pzz)
E911 Restart The E911 card has restarted.
Alarm data = Cabinet, Slot(Cx-Syy)
E911 Block The E911 card has blocked because the system
detects the card does not work correctly.
Alarm data = Cabinet, Slot(Cx-Syy)
WLI Restart The WLI card has restarted.
Alarm data = Cabinet, Slot(Cx-Syy)
WLI Block The WLI card has blocked because the system
detects the card does not work correctly.
Alarm data = Cabinet, Slot(Cx-Syy)
OfficeServ 500 Programming Guide
(Continued)
Definition
2-405