Lcr Class Of Service - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[310] LCR CLASS OF SERVICE

Assigns the LCR class of service allowed on a per-station/per-trunk basis. There are eight
classes which may be assigned. LCR class of service allows specific users to trunk advance
up to a matching LCR class of service programmed in MMC 712.
CONDITIONS
NONE
DEFAULT DATA
LEAST COST ROUTING COS: 1
ACTION
1) Press Transfer button and enter 310.
Display shows:
2) Dial station/trunk number.(e.g., 205)
OR
Press Volume button to select station and
press Right Soft button to move cursor.
OR
Press ANS/RLS button to select All stations.
3) Dial 1-8 to select class type.(e.g., 3)
OR
Press Volume button to select class type and
press Right Soft button to return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
LCR PROGRAMMING
MMC 710
MMC 711
MMC 712
MMC 713
2-88
LCR DIGIT TABLE
LCR TIME TABLE
LCR ROUTE TABLE
LCR MODIFY DIGIT TABLE
DISPLAY
[201] LCR CLASS
LCR CLASS 1
[205] LCR CLASS
LCR CLASS 1
[ALL] LCR CLASS
LCR CLASS ?
[205] LCR CLASS
LCR CLASS 3
© SAMSUNG Electronics Co., Ltd.