Assign Disa Trunk - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[410] ASSIGN DISA TRUNK

Allows the system the ability to have Direct Inward System Access(DISA).
Because there is a possibility that unauthorized calls will be made via this feature, several
safeguards have been added. The end user must be informed of these to prevent unnecessary
service calls. DISA can lockout when a predetermined number of invalid consecutive calls are
attempted. Callers will then receive error tone until the programmable timer has expired.
CONDITIONS
The * key may be used to initiate new dial tone while in a station to station call.
The # button may be used to terminate the DISA call and disconnect the central office
line. DISA lines must be assigned to the Ring Plan(s).
DEFAULT DATA
ALL TRUNKS: NORMAL
ACTION
1) Press Transfer button and enter 410.
Display shows:
2) Dial trunk number.(e.g., 704)
OR
Press Volume button to select trunk and press
Right Soft button.
OR
Press ANS/RLS button to select all trunks.
3) Press Volume button to select a Ring Plan.
OR
Using the dial pad press 1 to apply and 0 not to apply
to a particular Ring Plan and press Right Soft button
to return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 500
MMC 507
2-120
SYSTEM-WIDE COUNTERS
ASSIGN RING PLANS
DISPLAY
[701] 123456
DISA LINE:000000
[704] 123456
DISA LINE:000000
[ALL] 123456
DISA LINE:000000
[704] 123456
DISA LINE:001000
© SAMSUNG Electronics Co., Ltd.