Bsi Rf Carrier - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

[747] BSI RF CARRIER

A base station uses one of 10 channels(FDMA technology). This MMC is used to allow or

deny the use of each channel(carrier). By default, all carriers can be used by a base station.

0: Carrier can be used

1: Carrier cannot be used

DEFAULT DATA

1) Press Transfer button and enter 747.

The display shows the status of each carrier(0-9):

If '1' is shown below a carrier then this carrier can be

used by the base station.

If '0' is shown below a carrier then this carrier cannot

be used by the base station.

2) Dial 1 or 0 for each carrier.

3) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.