Assign Cos Contents - Samsung OfficeServ 500 Programming Manual

[701] ASSIGN COS CONTENTS

Similar to MMC 700 but does not allow a copy command. This MMC is primarily used for
creating a new class of service. If the unsupervised conference feature is allowed, a
programmed CONF key must be available to allow re-entry into a conference call.
There are 30 classes of service available.
This MMC is divided into 5 categories.
No Category
0 TOLL LEVEL
1 USABLE FEATURES
© SAMSUNG Electronics Co., Ltd.
TOLL
0 A Follow toll class A(Unrestricted)
1 B Follow toll class B in MMC 702, 703
2 C Follow toll class C in MMC 702, 703
3 D Follow toll class D in MMC 702, 703
4 E Follow toll class E in MMC 702, 703
5 F Follow toll class F in MMC 702, 703
6 G Follow toll class G in MMC 702, 703
7 H Follow toll class H(All restricted)
No COS Default
00 AA CALER YES
01 ABSENCE YES
02 ALM CLR YES
03 AUTO RDL YES
04 CALLBACK YES
05 CLIP ABN YES
06 CLIP INQ YES
07 CLIP INV YES
08 CONFER. YES
09 DALM CLR YES
10 DIRECT. YES
11 DISA YES
12 DND YES
13 DND FWRD YES
14 DND OVRD YES
15 DOOR YES
16 DSS YES
17 DTS YES
18 EXT AREC NO
19 EXT FWD YES
OfficeServ 500 Programming Guide
Description
LEVEL
Description
Auto answer control by caller
Absence
Alarm Clear
Retry on busy
Callback
Caller ID Abandon
Caller ID Inquire
Caller ID Investigate
Conference
DISA alarm ring clear
Directory dial
Allow DISA use
Do Not Disturb
Forward Do Not Disturb
Do Not Disturb override
Door ring answer
Direct station select
Direct trunk select
Intercom call automatic record
(SVM-800)
External call forward
2-215