Change Feature Passcode - Samsung OfficeServ 500 Programming Manual

[202] CHANGE FEATURE PASSCODE

Used to change the passcodes for the following features.
No Feature
0 RING PLAN
1 DISA ALARM
2 ALARM CLR
3 AA RECORD
5 DELETE
6 WLAN REGST
CONDITIONS
The passcode is four digits long. Each digit can be 0~9.
The current passcode is required for this MMC.
DEFAULT DATA
RING PLAN: 0000
DISA ALARM: 5678
ALARM CLR: 8765
AA RECORD: 4321
DECT REGST: 4321
DELETE: 9999
WLAN REGST: 0000
ACTION
1) Press Transfer button and enter 202.
Display shows:
2) Press Volume button to make selection and press
Right Soft button to move cursor to passcode entry.
3) Enter new passcode via digits from dial keypad.
Press Right Soft button to return to step 2.
Continue to change other passcodes.
© SAMSUNG Electronics Co., Ltd.
This is the passcode required to place the system in different ring
plans(RP) or change the ring time override(RTO).
This is the passcode required to clear a DISA ALARM generated when
the number of DISA attempts are exceeded.
This is the passcode required to clear a ALARM generated by the
disconnection of BI-PMS SIO. -Available in Hotel/Motel enabled only.
This is the passcode required to record prompts for use with the AA
ports on the Auto Attendant card.
This is the passcode required to registration of DECT phone.
This is the passcode required for registration of a WIP phone.
OfficeServ 500 Programming Guide
Description
DISPLAY
CHANGE PASSCODE
RING PLAN :0000
CHANGE PASSCODE
AA RECORD :4321
CHANGE PASSCODE
AA RECORD :9999
2-47