Lan Printer Parameter - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[829] LAN PRINTER PARAMETER

This program sets the various parameters required for printing to a LAN connected device.
The eight types of data listed below can be displayed using the LAN printer.
01. SMDR
02. UCD REPORT
03. TRAFFIC REPORT
04. ALARM REPORT
05. UCD VIEW
06. PERIODIC UCD
07. HOTEL REPORT
08. PMS
The items that are set in this program are listed below.
No Option
00 DATA TYPE
01 CURR STATUS
02 EMPTY BUFF
03 UPDATE LAN
04 DESTINATION
05 PRINTER IP
06 PRINTER TCP
07 LAN TCP
08 RETRY COUNT
09 RETRY WAIT
10 PJL ENABLE
11 LANGUAGE
12 PAPER SIZE
13 FONT TYPE
14 DUPLEX ENAB
15 ORIENTATION
16 PRINT TRAY
17 RESOLUTION
18 LINE/PAGE
CONDITIONS
NONE
2-358
Default
- Type of data to be displayed
OFF Current status of the LAN printer
NO Prints all data left in the buffer
NO Applies modified items
OFF Data transmit destination(Off, Printer, PC, Both)
200.1.1.1 The IP address of the LAN printer
10010 The TCP port of the printer
10020 LAN TCP port
03 Re-transmit attempt count(00~10)
010 sec Wait time for re-transmit(005~250 sec)
FALSE Sets PJL(0. FALSE, 1. TRUE)
RAW Printer language(0. RAW, 1. PCL, 2. PS)
LETTER Paper size(0. A4, 1. LETTER)
COURIER Font type(0.COURIER, 1.TIMES NEW ROMAN)
FALSE Sets duplex(0. FALSE, 1. TRUE)
PORTRAIT Orientation(0. PORTRAIT, 1. LANDSCAPE)
DEFAULT Printer tray(0.Default, 1.Tray1, 2.Tray2, 3.Manual)
300 Resolution(0.300, 1.600)
60 Line per page
Description
© SAMSUNG Electronics Co., Ltd.