Set Programmed Message - Samsung OfficeServ 500 Programming Manual

[115] SET PROGRAMMED MESSAGE

Allows the system administrator to set a programmed message at any or all phones.
There are 20 messages available. The last five message are can be modified by each phone user.
CONDITIONS
The first ten are pre-programmed and the remaining entries can be customized in MMC
715, Programmed Station Message.
DEFAULT DATA
NO MESSAGES SELECTED
ACTION
1) Press Transfer button and enter 115.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and
press Right Soft button to move cursor.
OR
Press ANS/RLS button to select all.
3) Dial an entry number to select message
Number.(e.g., 05)
OR
Press Volume button to select message and
press Right Soft button to return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 715
MMC 722
MMC 723
© SAMSUNG Electronics Co., Ltd.
PROGRAMMED MESSAGE
STATION KEY PROGRAMMING
SYSTEM KEY PROGRAMMING
OfficeServ 500 Programming Guide
DISPLAY
[201] PGMMSG(00)
CANCEL PGM MSG
[205] PGMMSG(00)
CANCEL PGM MSG
[ALL] PGMMSG(??)
[205] PGMMSG(05)
PAGE ME
2-29