Bri Options - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[428] BRI OPTIONS

Assigns several options on a per-BRI basis and there are different options depending on
whether the BRI is programmed as a trunk or station in MMC 423.
OPTIONS FOR BRI PORTS PROGRAMMED AS TRUNKS
No Option
0 CHANNEL ANY
1 BRI MODE
P-P NOR
P-P DID
P-M NOR
P-M MSN
2 DLSEND
ENBLOCK
OVERLAP
3 CLIP TABLE
4 NB TYPE
UNKNOWN
INT.NAT
NATIONAL
NETWORK
SUBSCRIB
EXTEN
ABBREV
5 NB PLAN
UNKNOWN
2-146
When this option is set to YES, the system will place calls on any free
channel of that BRI if the channel chosen by the user is busy. If set to
NO, you will receive a busy signal if they attempt to access a busy
channel even if the other channel on that BRI is free.
BRI access mode select.
Point to Point Normal. This operates like a standard telephone line with
one CO number per channel and ring according to MMC 406.
Point to Point Direct Inward Dial. This operates in a similar manner to an
analog DID circuit with multiple CO numbers pointed to a single channel
and translated within the system(MMC714) to a single device.
Point to Multi-point NORmal. This type of circuit operates in a similar
manner to P-P NORmal but allows multiple devices to be attached to the
circuit. Ringing is defined in MMC 406.
Point to Multi-point MSN. This setting is used when the line uses the
MSN supplementary service. Ringing is defined in MMC 429.
BRI dial sending mode select.
Digits will be collected and sent in a single block similar to a Cell phone.
Digits will be sent as they are dialed by the user.
Used to select the Calling Party Number to send to the network. In case
of NONE, MMC405 CO TRUNK NUMBER is sent to the network. In
other cases, MMC 323 Calling Party Number entry corresponding with
the selected number is sent to the network.
Used to select the type of the Calling Party Number to send to the network.
Unknown number
International number
National number
Network specific number
Subscriber number
Local number
Abbreviated number
Used to select the type of the Calling Party Number Plan to send to the
network.
Unknown numbering plan
Description
© SAMSUNG Electronics Co., Ltd.