System I/O Parameter - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[804] SYSTEM I/O PARAMETER

Provides a means of assigning a system I/O port for use with one of the service types
detailed below. A system has two SIO ports defined as IOM ports 2 and 3 and an optional
modem port defined as port 5. In order for remote programming to work correctly the
modem port must be assigned as PCMMC.
No Option
0 SERVICE
(Service Type)
1 BAUD
[Baud Rate(Speed)]
2-324
No Type
00 NOT USE not used
01 PCMMC Connects PCMMC
02 SMDR SMDR print
03 UCD REPT UCD report
04 UCD/SMDR UCD report and SMDR print
05 CTI Connects CTI
06 CTI/SMDR Connects CTI with SMDR data
07 CTI/UCD Connects CTI with UCD data
08 CTI/S/U Connects CTI with SMDR data and UCD data
09 TRAFFIC Call Traffic data print
10 TRF/SMDR Call Traffic data and SMDR print
11 ALARM System Alarm report
12 ALM/TRAF System Alarm data and Call Traffic data print
13 PERI UCD Periodic UCD report
16 HM REPT Hotel/Motel report(Hotel/Motel related)
17 PMS PMS data print(Hotel/Motel related)
18 PMS SMDR PMS data and SMDR print(Hotel/Motel related)
19 BD-PMS Connects Bi-directional PMS
(Hotel/Motel related)
27 UCD VIEW UCD view data print(MMC 860 enabled only)
28 UV/SMDR UCD view data and SMDR print
(MMC 860 enabled only)
29 UV/CTI Connects CTI with UCD view
(MMC 860 enabled only)
30 REMO M/A Connects Remote M & A
0: 4800 bps
1: 9600 bps
2: 19200 bps
3: 38400 bps
Description
Description
© SAMSUNG Electronics Co., Ltd.