Authorization Code - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

CHAPTER 2. Ошибка! Стиль не определен.

[707] AUTHORIZATION CODE

Enables the authorization feature on a per-class of service selection. There are 500

available entries. Authorization codes can be up to 4 to 10 digits.

DEFAULT DATA

1) Press Transfer button and enter 707.

Display shows:

2) Dial code index number.(e.g., 005)

Press Volume button to selected index number and

press Right Soft button to move cursor.

3) Enter authorization code(minimum of four digits and

a maximum of 10 digits via dial keypad

(e.g., 1234567890)

and press Right Soft button to move cursor.

4) Enter class of service number 01-30.(e.g., 05)

Press Volume button to select COS and press Right

Soft button to select and return to step 2.

5) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.