Copy Key Programming - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

[720] COPY KEY PROGRAMMING

Provides a tool for duplicating key assignment from one phone to another.

This can be done on a per-station basis or on all stations, but not on a group of stations.

One limitation is that the original and target phones must be of the same type(e.g., same

number of buttons).

DEFAULT DATA

1) Press Transfer button and enter 720.

Display shows:

2) Enter the station number to copy.(e.g., 205)

Press Volume buttons to make selection and

press Right Soft button to move cursor.

Press ANS/RLS button for select all station.

3) Enter station number to copy from(e.g., 203)

and cursor returns to step 2.

Press Volume buttons to make selection and

press Right Soft button to return to step 2.

4) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.