Customer Access Mmc Number - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[802] CUSTOMER ACCESS MMC NUMBER

Allows the System Administrator to have access to certain MMCs. For example,
it is required that the System Administrator customer have access to MMC 102 Call
Forward for call forwarding but it is not required that the System Administrator have access
to MMC 710 LCR Digit Table for LCR dial plans. This MMC is for both tenants.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 802.
Display shows:
2) Enter desired tenant number(1-2) via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter desired MMC number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
4) Enter 1 for YES or 0 for NO via dial keypad.
OR
Press Volume button to make selection and
press Left Soft button to return to step 3 to
make additional entries.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
2-322
DISPLAY
CUST.USE MMC :1
100:STN LOCK:YES
MMC TENANT:1
100:STN LOCK:YES
MMC TENANT:1
102:CALL FWD:YES
MMC TENANT:1
102:CALL FWD:NO
© SAMSUNG Electronics Co., Ltd.