Lcr Route Table - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[712] LCR ROUTE TABLE

The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the
completion of an outward bound call. This table works in conjunction with LCR DIGIT
TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE.
After you dial a valid digit string, the system uses the LCR ROUTE TABLE to select a
specific predetermined trunk group. There is a maximum number of 32 routes available.
If more than one trunk group is available for call completion, the system uses the first
designated trunk group and then starts to utilize succeeding trunk groups. If all trunk
groups are busy in a selected route, call queue becomes active and allocates trunks as they
become available.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 712.
Display shows:
2) Dial LCR ROUTE table number.(e.g., 05)
OR
Press Volume button to selected table and press
Right Soft button to move cursor.
3) Dial TIME BAND index number 1-4.(e.g., 2)
OR
Press Volume button to selected index and press
Right Soft button to move cursor.
4) Dial LCR COS number 1-8.(e.g., 4)
OR
Press Volume button to selected COS and press
Right Soft button to move cursor.
5) Dial TRUNK GROUP access code.(e.g., 801)
OR
Press Volume button to selected access code and
press Right Soft button to move cursor.
2-234
DISPLAY
LCR ROUTE (01:1)
C:1 G:NONE M:---
LCR ROUTE (05:1)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:801 M:---
© SAMSUNG Electronics Co., Ltd.