E1/Pri Crc4 Option - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[426] E1/PRI CRC4 OPTION

This option is used to enable/disable CRC4 generation and checking.
CONDITIONS
It is useful with some networks which do not support CRC4 framing but only PCM30
framing.
After changing this option, MMC 425 must be used to restart the card to make the
change effective.
DEFAULT DATA
CRC4: ON
ACTION
1) Press Transfer button and enter 426.
Display shows:
2) Enter first trunk number in PRI card.(e.g 701)
OR
Press Volume button to select trunk and use
Right Soft button to move cursor.
3) Enter 1 for ON 0 for OFF.
OR
Press Volume button to select and press
Right Soft button.
4) Press Transfer button and enter to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 425
2-142
CARD RESTART
DISPLAY
[701] E1/PRI CRC
ON
[701] E1/PRI CRC
ON
[701] E1/PRI CRC
OFF
© SAMSUNG Electronics Co., Ltd.