Customer On/Off Per Trunk - Samsung OfficeServ 500 Programming Manual

[400] CUSTOMER ON/OFF PER TRUNK

Assigns several options(listed below) on a per-trunk basis.
No Option
0 1A2 EMULATION
1 TRUNK INC DND
2 TRUNK FORWARD
6 EFWD EXT CLI
7 REPEAT CLI
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
SOME OPTIONS ARE DEPEND ON COUNTRY
ACTION
1) Press Transfer button and enter 400.
Display show:
2) Dial trunk number.(e.g., 704)
OR
Press Volume button to select trunk.
OR
Press ANS/RLS button for all trunks and press
Right Soft button to move cursor to options.
3) Dial option number from above list.(0-4)
OR
Press Volume button to select option and press
Right Soft button to move cursor.
© SAMSUNG Electronics Co., Ltd.
Default
OFF When this option is set to ON up to 4 internal stations
can participate in a conversation on this trunk by
pressing the trunk key.
OFF When this option is set to ON a trunk that is
programmed to ring a specific station(a private line or
DIL) will ring at that station if the station is in DND.
ON When this option is set to OFF this trunk will not follow a
ringing stations call forwarding.
ON This option determines what kinds of CLI number will be
sent to the external forwarded outgoing call.(Station or
Received CLI from Trunk)
ON This option determines what kinds of CLI number will be
sent to the trunk to trunk call.(Trunk or Received CLI
from Trunk)
OfficeServ 500 Programming Guide
Description
DISPLAY
[701] TRK ON/OFF
1A2 EMULATE:OFF
[704] TRK ON/OFF
1A2 EMULATE:OFF
[ALL] TRK ON/OFF
1A2 EMULATE:?
[704] TRK ON/OFF
TRK FORWARD:ON
2-105