Trunk Cos - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[430] TRUNK COS

Used to assign a class of service to each trunk during one of the 6 different ring plans
available. There are 30 different classes of service that are defined in MMC 701 Assign
COS Contents. Classes of service are numbered 01-30. Trunk COS applies on Tandem
connections.
CONDITIONS
NONE
DEFAULT DATA
ALL RING PLANS COS 01
ACTION
1) Press Transfer button and enter 430.
Display shows first trunk:
2) Dial trunk number.(e.g., 705)
OR
Use Volume button to scroll through trunks.
Press Right Soft button to advance step 3.
OR
Use Volume button to scroll through trunks and
press Left Soft button to advance step 4.
OR
Press ANS/RLS button to select all trunks.
3) Enter day class of service.(e.g., 05)
OR
Use Volume button to scroll through classes of
service and press Right Soft button to advance
step 4.
OR
Use Volume button to scroll through classes of
service and press Left Soft button to return to step 2.
4) Enter the next ring plan class of service. (e.g., 05)
OR
Use Volume button to scroll through classes of
service and press Right Soft button to return to
step 2.
OR
Use Volume button to scroll through classes of
service and press Left Soft button to return to the
previous step.
2-152
DISPLAY
[701] TRK COS
1:01 2:01 3:01
[705] TRK COS
1:01 2:01 3:01
[ALL] TRK COS
1:01 2:01 3:01
[705] TRK COS
1:05 2:01 3:01
[705] TRK COS
1:05 2:05 03:01
© SAMSUNG Electronics Co., Ltd.