Assign Tenant Group - Samsung OfficeServ 500 Programming Manual

[803] ASSIGN TENANT GROUP

Allows the assignment of tenant groups on a per-cabinet, slot and port basis.
The simple rule is Cabinet-Slot-Port = Tenant. The simplicity of this program allows for
flexible assignments. The only information needed is the correct correlation of entries.
CONDITIONS
NONE
DEFAULT DATA
ALL ASSIGNMENTS TENANT 1
ACTION
1) Press Transfer button and enter 803.
Display shows:
2) Enter cabinet number if no change press
Right Soft button to move cursor.
3) Enter slot number if no change press Right
Soft button to move cursor.
4) Enter port number if no change press
Right Soft button to move cursor.
5) Enter tenant number if no change press
Right Soft button to return to step 2.
6) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
TENANT GROUP
C:1 S:1 -01 T:1
TENANT GROUP
C:1 S:1 –01 T:1
TENANT GROUP
C:1 S:2 -01 T:1
TENANT GROUP
C:1 S:2 -03 T:1
TENANT GROUP
C:1 S:2 -03 T:2
2-323