Aa Translation Table - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[732] AA TRANSLATION TABLE

AA translation tables are responsible for routing calls based on digits dialed.
There are 12 translation tables available. Each table can be assigned to one or more plans in
MMC 733 Auto Attendant Plan Programming. A translation table consists of a number of
100 entries. Each entry number has two fields to program: the first field is for the digits
received by the caller and the second field is for the destination or action.
The destination field can be a station number, station group or another plan. Plans are
entered by pressing special key A plus two digits 01-12. If a voice mail group is entered,
the call will be transferred to the voice mail system with the appropriate in band digit
packet to indicate a Forward All call from the station number dialed by the caller.
The digits defined in the first field of this MMC [dialed digits] must be a valid station
number.
If the digits programmed as a destination are a voice mail port the voice mail port will
receive an in band packet of DTMF equal to [FWD from EXTENSION NUMBER
DIALED].
There are a number of special characters that are used in translation tables.
They are as follows:
* = Used to represent any digit.
P = (Special Key A) Plan. Used to assign a plan as a destination(P01-P12).
B = (Special Key B) Buffer. When used in the destination field, transfers the call to the
same extension as the digits dialed by the caller.
C = (Special Key C) Change greeting or Ring Plan.
S = (Special Key E) System Speed Dial Number. Used to assign a System Speed Dial
number as a destination.
2-274
© SAMSUNG Electronics Co., Ltd.