Alarm Reminder Clock - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[112] ALARM REMINDER CLOCK

Allows the system administrator or technician to set or change the alarm clock/appointment
reminder feature for any station. This must be done for single line telephones, as they
cannot access programming. Three alarms may be set for each station and each alarm may
be defined as a one-time or TODAY alarm or as a DAILY alarm, as described below. The
TODAY alarm is automatically cancelled after it rings, while the DAILY alarm rings every
day at the same time. Alarm numbers are 1, 2 and 3. In the case of Secondary Pair
assignments(MMC 220) the alarm only rings the station that is programmed and does not
ring the paired station.
No
0 NOTSET
1 TODAY
2 DAILY
CONDITIONS
NONE
DEFAULT DATA
ALARMS ARE NOTSET
ACTION
1) Press Transfer button and enter 112.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and
press Right Soft button.
3) Dial 1~3 to select alarm.(e.g., 1)
OR
Press Volume button to select alarm and
press Right Soft button.
4) Enter alarm time in 24-hour clock format.
(e.g., 1300 for 1pm)
2-24
Type
No alarm
Alarm only once
Alarm daily at set time
Description
DISPLAY
[201] ALM CLK(1)
HHMM: NOTSET
[205] ALM CLK(1)
HHMM: NOTSET
[205] ALM CLK(1)
HHMM: NOTSET
[205] ALM CLK(2)
HHMM:1300 NOTSET
© SAMSUNG Electronics Co., Ltd.