Vm Card Restart - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:
Table of Contents

Advertisement

CHAPTER 2. Ошибка! Стиль не определен.

[750] VM CARD RESTART

This MMC is only used for the Samsung Plug In Voice Mail Card.
There are three options available in this MMC:
No
Option
0
DOWNLOAD
1
CARD RESTART
2
VIRTUAL NUMBER
DOWNLOAD
Remove Built-In Voice Mail Card
If during any test procedures you need to run the system with a default database
and power up with this MMC option set to YES the Built-In Voice Mail database
will be overwritten according to the data in MMC 751 and the default numbering
plan. If you plan this type of test, remove Built-In Voice Mail Card until the
procedure is finished and the customer database is reloaded.
CONDITIONS
NONE
2-300
When the Built-In Voice Mail card starts, part of the power up
procedure will download data from the system to determine time,
date, what mailboxes to create, and system numbering plan. This
must be done at least once, but once done this download feature
can be turned NO to save boot up time.
If this option is set to YES the Built-In Voice Mail card will
immediately restart according to the download OPTION specified
above.
This option is determine which type virtual port include during
mailbox and system numbering plan downloading procedure.
The virtual port type are followed:
No
Type
0
VIRTUAL EXT
Virtual extension number
1
DESKTOP ITP
DESKTOP IP-based phone number
2
DECT PHONE
DECT terminal number
3
MOBILE ITP
Wireless IP-based mobile phone
number
4
BRI STATION
ISDN terminal number
5
VOIP NET TRK
VoIP networking trunk number
6
VOIP 323 TRK
VoIP H.323 trunk number
7
VOIP SIP TRK
VoIP SIP trunk number
8
REMOTE STN
Remote station number via networking
Description
Description
© SAMSUNG Electronics Co., Ltd.

Advertisement

Table of Contents
loading

Table of Contents