Sample Printing Menu - MUTOH Valuevet VJ-628X Maintenance Manual

5.8 Sample printing Menu

5.8 Sample printing Menu
This menu is used to print out a sample printing.
Diagnosis item
Adjust ALL The following contents are printed.
1. Model name/Serial No./year/month/day/time
2. Nozzle check pattern
normal/Horizontal line/Vertical line (CW)/Vertical
line(CCW)
3. Head Slant Slant1
4. Head Slant Slant2
5. UniD 320 VSD1 Low
6. UniD 320 VSD3 Low
7. UniD 320 VSD4 Low
8. BiD 320 VSD1 Low
9. BiD 320 VSD3 Low
10. BiD 320 VSD4 Low
11. UniD 400 VSD1 Low
12. UniD 400 VSD3 Low
13. UniD 400 VSD4 Low
14. BiD 400 VSD1 Low
15. BiD 400 VSD3 Low
16. BiD 400 VSD4 Low
17. the above 5 to 10 (PG-High)
18. the above 11 to 16(PG-Low)
NOTE
When a speed mode is "Low", the part of 400 is
printed with 240.
5.6.12 Solid Print Menu
Contents
Diagnosis item
Parameter ALL Prints out the following adjustment parameters.
Rear sensor VR/GAIN
Edge sensor VR/GAIN
Head rank
UniD adjustment value
BiD adjustment value
Margin adjustment value
Company code
Periodical cleaning
Servo parameter
Log info. Prints the serious error history and smart chip log.
S/C Log info. Prints the smart chip Log.
NOTE
If you have not registered the serial number of the machine, you must enter the
number before you can start the Parameter ALL printing.
This menu is the same function as the
VJ628XE-M-00
Contents
"5.6.8 Test Printing Menu
312