Removing Side Cover - MUTOH Valuevet VJ-628X Maintenance Manual

3.2 Removing Covers
3.2.2

Removing Side Cover

● Tools & Jigs
Name
Phillips screwdriver No.2
slotted screwdriver（precision）
NOTE
When removing R Side Cover, the work of Procedure 1~2 are required.
Other work is the same at R Side Cover and L Side Cover.
In this section, the photograph of R Side Cover is used.
1
Remoe Pressure Handle.
Insert slotted screwdriver to the hole of
Pressure Handle, then release the hook.
A : hole
3.2.2 Removing Side Cover
No. Remarks
-
Generic
products
-
A
2
Remove the tip of Waste Fluid Tube from the
main body.
A : Waste Fluid Tube
CAUTION
If the clamp is loosened, Ink may leak.
3
Remove the screws (3 pieces).
A : Tapping screw M4ｘ10 S Tight cup
4
Remove the screws (2 pieces).
A : Tapping screw M4ｘ8 S tight bind
VJ628XE-M-00
A
Poor Poor
Good Good
A
A
65