MUTOH Valuevet VJ-628X Maintenance Manual page 192

4.3 Working with MUTOH Service Assistance Software
(11)Language setting
Menu and message can be shown in either English or Japanese which can be selected.
Change shall be activated when program is restarted.
Follow the steps below to change language.
1
Select [Setup (S)] - [Language (L)]
form the main window.
2
Click [OK] on [Confirmation of
language switching] window.
Application shall be terminated
automatically.
NOTE
• When English mode is selected, [Setup(S)] on menu changes to "Setup (S)".
• The language displayed at the initial startup of MSA depends on the language
setting of your OS.(When the language setting of your OS is set to a language
other than Japanese, MSA is displayed in English.)
4.3.3 Required Environment
VJ628XE-M-00
192